neware battery tester

Solid-state synthesis and electrochemical performance of Li4Ti5O12/graphene composite for lithium-ion batteries

Posted on Leave a commentPosted in Neware Testing News

a b s t r a c t Homogeneous Li4Ti5O12/graphene composite is prepared via an in-situ solid state reaction, after carbon pre-coating has been carried out. Its microstructure is compared with the materials prepared by a similar way, but without carbon coating. The results reveal that the carbon coating not only effectively confines aggregation and […]

neware battery tester

Highly durable organic electrode for sodium-ion batteries via a stabilized α-C radical intermediate

Posted on Leave a commentPosted in Neware Testing News

Abstract It is a challenge to prepare organic electrodes for sodium-ion batteries with long cycle life and high capacity. The highly reactive radical intermediates generated during the sodiation/desodiation process could be a critical issue because of undesired side reactions. Here we present durable electrodes with a stabilized α-C radical intermediate. Through the resonance effect as […]

ViPER laboratory-Neware Battery Cycler

The ViPER laboratory

Posted on Leave a commentPosted in Neware Testing News

Established in January 2014, the ViPER laboratory serves as Purdue University’s premier, self-contained center for battery fabrication and testing. Our next-generation materials are developed using the most cutting-edge synthesis techniques, such as ultrasonic, hydrothermal, and solid-state synthesis. Our battery laminates are produced using the most accurate and precise equipment in a carefully-designed fabrication process drawing […]

Testing News-CALCE BATTERY RESEARCH Battery Testing

CALCE BATTERY RESEARCH

Posted on Leave a commentPosted in Neware Testing News

LITHIUM-ION BATTERY TESTING, FAILURE ANALYSIS, AND ESTIMATION OF STATE OF CHARGE, STATE OF HEALTH, AND REMAINING USEFUL PERFORMANCE CALCE’s Battery Team has recently installed new battery testing equipment provided by Neware as part of a collaborative effort. The BTS4000 battery test system is Neware’s 4th generation tester with almost a decade of reliable service in […]

Testing News-HK Battery Testing-1

A gradient porous cathode for non-aqueous lithium-air batteries leading to a high capacity

Posted on Leave a commentPosted in Neware Testing News

Department of Mechanical and Aerospace Engineering, The Hong Kong University of Science and Technology, Clear Water Bay, Kowloon, Hong Kong, China The discharge performance of the cathodes was tested in a nonaqueous lithium-air battery that consisted of a lithium foil anode, a glass-fiber separator (Whatman GF/C), and 250 μL 1 M LiTFSI (Sigma-Aldrich, 99.95%) in […]

Testing News-Standford Battery Testing

Ultrafast aluminum battery offers safe alternative to conventional batteries

Posted on Leave a commentPosted in Neware Testing News

Scientists have invented the first high-performance aluminum battery that’s fast-charging, long-lasting and inexpensive. Researchers say the new technology could replace many lithium-ion and alkaline batteries in wide use today. Stanford University scientists have invented the first high-performance aluminum battery that’s fast-charging, long-lasting and inexpensive. Researchers say the new technology offers a safe alternative to many […]