Ploymer Battery Tester Cycler-Neware Battery Testing System
his system provides most applications in battery testing fields such as electrode materials research,
battery performance test, small-scale battery formation, capability grading, battery pack testing and etc.
Software
1, Windows-based software interface for easy operation;
2, Uses standard SQL data-base management;
3, Real-time monitoring windows and integrated graph/data windows
can set various working modes for measuring capacity and cycle life of all types of rechargeable batteries, such as:
constant current discharge, constant current charge, constant voltage charge, rest, as well as voltage, current, time,
capability, negative voltage slope, and other limit conditions;
4,The user can define the curve by different types such as voltage-time curve, current-time curve, capacity-voltage curve,
loop times-charge/discharge capacity curve, loop times-charge/ discharge efficiency curve, etc. to make curves
be compared both by visually and statistically;
5, Provide timely instructions, warnings, and intelligent support;
6, Compliance CE Certified.
Warranty One Year limited warranty with lifetime support for the battery analyzer.
BTS-5V6A |
Battery Testing System |
Model: |
BTS-5V6A |
Material Code: |
CT-4008-5V6A |
|
Description |
Product Specification |
AC Input |
AC 220V±10% 50Hz |
Power |
425 |
W |
Resolution |
AD: 16bit; DA: 16bit |
Input Impedance |
≥1MΩ |
Voltage |
Measuring Range |
Charge: 25mV~5V |
Discharge:25mV~5V |
|
Discharge Min Voltage |
1.2V |
|
Accuracy |
± 0.05% of FS |
|
Stability |
± 0.05% of FS |
Current |
Range |
Range1: 0.5mA~0.1A Range2: 0.1A~6A |
|
Accuracy |
± 0.05% of FS |
|
Stability |
± 0.05% of FS |
Power |
Output Power Per Channel |
30W |
|
Stability |
± 0.1% of FS |
Time |
Rise Time |
1ms (0~Full Range) |
|
Step Time |
≤ (365*24) hour/step |
Time Format 00:00:00:000 (h:min:s:ms) |
Data Acquisition
|
Intervals
|
Time interval Δt:(100ms~60000s) |
Voltage interval ΔU: (10mV~5V) |
Current interval ΔI: (6mA~6A) |
Frequency |
10Hz |
Charge |
Modeof Operation |
CCC, CVC, CC & CVC, CPC |
End Conditions |
Voltage, Current, Test Time, Capacity |
Discharge |
Modeof Operation |
CCD, CPD, CRD |
End Conditions |
Voltage, Current, Test Time, Capacity |
Pulse mode
|
Charge |
CR mode、CP mode |
Discharge |
CC mode、CP mode |
Min pulse width |
500ms |
Automated Switch |
Automated switch from charge to discharge for each pulse |
End Condition |
Voltage、Relative Time |
DCIR |
Support for the calculation of the point of the DCIR |
Cycle
|
Cycles |
65535 |
Steps |
254 |
Nested Function |
Max three levels of loops |
Protective Function
|
Software
|
● Power-off data protection |
● Off-line Operating |
● User-defined safety(upper and lower)tolerance of current, voltage and delay time |
Channel Features |
Independent pairs of closed loop for constant current source and constant voltage source |
Test Reports and Curves for analysis |
- Different types of curves can be created by software base on user definition. (Voltage-time curve, current-time curve, capacity-voltage curve, loops times charge/discharge capacity curve, loops times charge/ discharge efficiency curve, etc)
- Data reports are created by software. User can easily compare the performance of the batteries tested in channels both visually and statistically
|
Channels |
Independent control |
Battery Holders |
 |
STANDARD PACKAGE:
ITEM |
DESCRIPTION |
QTY |
1 |
8 Channel Battery Tester |
1pcs |
2 |
BTS-7.5.X NEWARE Analyzer Software |
1pcs |
3 |
mid-machine and cable line for connecting the computer |
1pcs |
4 |
alligator clips or polymer clips |
8pcs |
