BTS-9000-5V5A
Applied in battery materials research, high accuracy battery testing, plus test, DCIR test and Cycle life test.
Factory battery lab center, battery research institution and many intelligent university use bts-9000 for their battery testing experiments.
As the most cutting-edge equipment for battery material research, BTS9000 comes with extremely high accuracy(±0.02% of FS), amazing hardware response speed(≤100μs), wide range of applications, high-speed testing data acquisition and many other industry-proven characteristics, it’s your ultimate choice for battery material research!
It characterized with a data acquisition frequency up to 1000Hz, an accuracy of 0.02% FS and a minimum pulse width of 400us (microsecond) which can be utilized for GSM or some other rapid pulse tests. Comes to the pulse tests, BTS9000 supports GSM(Global System for Mobile Communications), GPRS(General Packet Radio Service), CDMA-standby, CDMA-talk(Code Division Multiple Access), IDEN(Integrated Digital Enhanced Networks), etc.
⊕1.Resolution: AD: 16bit; DA: 16bit;
⊕2.Accuracy : 0.02% FS;
⊕3.Response Time: ≤100us (Current in the range 10%~90% FS);
⊕4.Data Acquisition Frequency: 1000Hz;
⊕5.Minimum Pulse Width: 400us;
⊕6.Voltage Range: 5V;
⊕7.Current Ranges: Range 1: 160uA ± 32nA
Range 2: 5mA ± 1uA
Range 3: 160mA ± 32uA
Range 4: 5000mA ± 1mA
High Accuracy Material Battery Tester
SPECIFICATION(CT-9004-5V5A): multi-range Battery Tester
| Description | Specification | |
| AC Input | AC 220V +10% / -20%, 50Hz; | |
| Resolution | AD：16bit；DA：16bit | |
| Impedance input | ≥ 500MΩ | |
| Input power | 250 w | |
| Channel Feature | Independent pairs of closed loops for constant current source and constant voltage
source |
|
| Channel control mode | Independent control | |
| Voltage | Measuring Range | Charge：0.7V~5V；Discharge：0.7V~5V |
| Discharge Min Voltage | 0.7 V | |
| Accuracy | ± 0.02% of FS | |
| Stability | ±0.005% of FS | |
| Current | Measuring Range | Range1: 0.1uA—150uA |
| Range2：140uA—5mA | ||
| Range3：4.5mA—150mA | ||
| Range4: 140mA—5A | ||
| Accuracy | ± 0.02% of FS | |
| Range1: ± 30nA | ||
| Range2：± 1uA | ||
| Range3：± 30uA | ||
| Range4: ± 1mA | ||
| Stability | ±0.005% of FS | |
| Power | Max Output Power Per
Channel |
25W |
| Stability | ± 0.01% of FS | |
| Time | Rise Time | <= 100μS (10% to 90% or 90% to 10%); |
| Step Time Range | >=10ms | |
| Data
acquisition |
Intervals | Time△t：>=1ms |
| Voltage△U：>= 1mV | ||
| Current△I：>= 100nA | ||
| Frequency | 1000Hz | |
| Charge | Charge Mode | CC, CCCV, CV, CP, CR |
| End Conditions | Voltage, Current, △t, Capacity, Energy, Power | |
| Discharge | Discharge Mode | CC, CP, CR, Pulse |
| End Conditions | Voltage, Current, △t, Capacity | |
| Pulse | Charge | CC, CP |
| Discharge | CC, CP | |
| Min. pulse width | 400μs | |
| Pulses counts | Up to 16 changes in each pulse | |
| End conditions | Voltage, △t | |
| DCIR | Can be calculated by software | |
| Cycle | Max cycles | 1~65535 |
| Max steps in each cycle | 255 | |
| Max cycle nest | 4 | |
| Protection | Safety protection | l Power-off data protection |
| l Off-line operation mode | ||
| l User-defined protection conditions, such as upper and lower limited current/voltage, delay time, temperature, etc.; | ||
STANDARD PACKAGE:
| ITEM | DESCRIPTION | QTY |
| 1 | 4 Channel Battery Tester | 1pcs |
| 2 | BTS-9000 Series NEWARE Analyzer Software | 1pcs |
| 3 | cable line for connecting the computer | 1pcs |
| 4 | alligator clips or polymer clips | 8pcs |
