Li-ion Battery Cycler-Capacity Test Cycle Life Test Charge and Discharge Test

Li-ion Battery Cycler-Capacity Test Cycle Life Test Charge and Discharge Test

1)According to the international standard design, each channel of the system has an independent constant-current source and a hardware     constant-voltage source which make system stable & reliable

2)Modular design leads to easy maintain

3)Different holder selectable, satisfy your different needs

4)Efficient heat dissipation system, ensure proper working of equipments under 24hrs full load condition

5)Double loop-control adopted,no peak occured from CC to CV, protect the battery

 

Software Features

1)Each channel available for indepent program testing,Step continuable after Pause in any

conditions(including blackout)

2)Host computer adaptable to all kinds of lower machine,with interactive interface,easy to

operate

3)Fast data acquisition,sensitive to the changing of current & voltage,(AD ,16bit),dairy function

available

4)Powerful for data and chart processing ,support four types of report with various form formats

5)As an added bonus,professional tool software would be provided free of charge, including

accurancy correction software for current &     voltage .CTN No.& measuring range changable.

SPECIFICATION(CT-4008-5V6A): Double-range Battery Tester

BTS-5V6A		Battery Testing System
Model:	BTS-5V6A	Material Code:		CT-4008-5V6A
Description		Product Specification
AC Input		AC 220V±10% 50Hz
Power		425	W
Resolution		AD: 16bit; DA: 16bit
Input Impedance		≥1MΩ
Voltage	Measuring Range	Charge: 25mV~5V	Discharge:25mV~5V
	Discharge  Min Voltage	1.2V
	Accuracy	± 0.05% of  FS
	Stability	± 0.05% of  FS
Current	Range	Range1: 0.5mA~0.1A  Range2: 0.1A~6A
	Accuracy	± 0.05% of  FS
	Stability	± 0.05% of  FS
Power	Output Power Per Channel	30W
	Stability	± 0.1% of  FS
Time	Rise Time	1ms  (0~Full Range)
	Step Time	≤ (365*24)  hour/step			Time Format 00：00：00：000 (h:min:s:ms)
Data Acquisition	Intervals	Time interval  Δt:（100ms~60000s）
		Voltage interval ΔU: （10mV~5V）
		Current interval ΔI: （6mA~6A)
	Frequency	10Hz
Charge	Modeof Operation	CCC, CVC, CC & CVC, CPC
	End Conditions	Voltage, Current, Test Time, Capacity
Discharge	Modeof Operation	CCD, CPD, CRD
	End Conditions	Voltage, Current, Test Time, Capacity
Pulse mode	Charge	CR mode、CP mode
	Discharge	CC mode、CP mode
	Min pulse width	500ms
	Automated Switch	Automated switch from charge to discharge for each pulse
	End Condition	Voltage、Relative Time
DCIR	Support for the calculation of the point of the DCIR
Cycle	Cycles	65535
	Steps	254
	Nested Function	Max three levels of loops
Protective Function	Software	● Power-off data protection
		● Off-line Operating
		● User-defined safety(upper and lower)tolerance of current, voltage and delay time
Channel Features		Independent pairs of closed loop for constant current source and constant voltage source
Test Reports and Curves for analysis		Different types of curves can be created by software base on user definition. (Voltage-time curve, current-time curve, capacity-voltage curve, loops times charge/discharge capacity curve, loops times charge/ discharge efficiency curve, etc) Data reports are created by software. User can easily compare the performance of the batteries tested in channels both visually and statistically
Channels		Independent control
Battery Holders

 

STANDARD PACKAGE:

ITEM	DESCRIPTION	QTY
1	8 Channel Battery Tester	1pcs
2	BTS-7.5.X NEWARE Analyzer Software	1pcs
3	mid-machine and cable line for connecting the computer	1pcs
4	alligator clips or polymer clips	8pcs